This versatile, simple, noninvasive ventilation system is designed with advanced technology to be accurate, reliable and easily upgradeable. The BiPAP Vision System offers a low cost alternate form of sub-acute therapy for patients and may eliminate the need for intubation in appropriate candidates. The integrated display screen uses easy-to-read real time graphics in waveforms or bar scale format to provide enhanced monitoring for caregivers. Auto-Trak SensitivityT, ensures optimum sensitivity despite changing breathing patterns or circuit leaks. CE marked to the Medical Device Directive Caution: U.S. federal law restricts these devices to sale by or on the order of a physician.
Integrated Display Screen - Integrated Display Screen displays easy-to-read real time graphics in waveform or bar scale format, providing the following measured and calculated numerical values to assist with ventilator management: IPAP, Total Breath Rate, Exhaled Minute Ventilation, % Patient Triggered Breaths, Exhaled Tidal Volume, EPAP, Ti/Tot, Peak Inspiratory Pressure, Patient or Total Leak
Modes - CPAP and S/T are available for maintaining airway patency and providing pressure support ventilation. PAV * /T (Proportional Assist Ventilation/Timed mode) helps to promote improved patient comfort and enhanced patient/ventilator synchrony through independent adjustment of Volume and Flow assist based on the patients disease state.
Oxygen Control up to 100% - Allows you to blend oxygen within the unit in concentrations ranging between 21-100% without auxiliary oxygen tubing attached to the mask.
Pressure Regulation at the Mask - Pressure regulation at the mask allows you to regulate pressure therapy to assure delivery where it counts (not inside the machine), and automatically adjusts for variations.
Upgradeable Design Provides Flexibility - Upgradeable features provide flexibility in your purchase decision, now and in the future. The Vision System gives you the ability to upgrade instead of buying a new machine for each medical revolution.
BiPAP® Auto-Trak SensitivityTM - Optimum Response Automatically. The innovative development of Auto-Trak SensitivityTM enables the BiPAP Vision System to automatically respond to changing breathing patterns and circuit leaks by identifying leaks and adjusting variable sensitivity thresholds for optimum response with every breath.
Alarm Module - Alarm Module gives you a complete range of alarm options. Designed with mask ventilation in mind, the Vision System minimizes nuisance alarms caused by mask leak. When an alarm is activated, the system promptly displays alarm messages on the screen to assist with troubleshooting. Patient alarms include the following: High Pressure, Low Pressure, Apnea, Low Minute Ventilation, High Rate, Low Rate
Specifications
CPAP Control Range: 4 to 20 cm H2O
CPAP Control Increments: 1 cm H2O
S/T Control Range: 4 to 40 cm H2O
S/T Control Increments: 1 cm H2O
PAV */T Control Range: Quick Start Menu
PAV */T Control Increments: Obstructive, Restrictive, Mixed, Normal
IPAP Control Range: 4 to 40 cm H2O
IPAP Control Increment: 1 cm H2O
EPAP Control Range: 4 to 20 cm H2O
EPAP Control Increment: 1 cm H2O
CPAP Control Range: 4 to 20 cm H2O
CPAP Control Increment: 1 cm H2O
Rate Control Range: 4 to 40 BPM
Timed Inspiration Control Range: 0.5 to 3.0 sec
Timed Inspiration Control Increment: 4 set points: .05, .1, .2, .4 sec
Oxygen Concentration (% 02) - With optional Oxygen Module Control Range: 21 to 100%
Oxygen Concentration (% 02) - Width optional Oxygen Modult Control Increment: 4% from 21 to 25% 5% from 25 to 100%
High Pressure Alarm Control Range: 5 to 50 cm H2O
High Pressure Alarm Control Increment: 1 cm H2O
Low Pressure Alarm Control Range: Disabled;0 to 40 cm H2O
Low Pressure Alarm Control Increment: 1 cm H2O
Low Pressure Alarm Control Range: Delay 0 to 60 sec
Low Pressure Alarm Control Increment: 1 sec
Apnea Alarm Control Range: Disabled; 20 to 40 sec
Apnea Alarm Control Increment: 4 set points: Disabled, 20, 30, 40 sec
Low Minute Ventilation Alarm Control Range: Disabled; 1 to 99 L/min
Low Minute Ventilation Alarm Control Increment: 1 L/min
High Rate Alarm Control Range: 4 to 120 BPM
High Rate Alarm Control Increment: 1 BPM
Low Rate Alarm Control Range: 4 to 120 BPM
Low Rate Alarm Control Increment: 1 BPM
IPAP Parameters Control Range: 0 to 50 cm H2O
IPAP Parameters Control Increment: 1 cm H2O
EPAP Parameters Control Range: 0 to 50 cm H2O
EPAP Parameters Control Increment: 1 cm H2O
CPAP Parameters Control Range: 0 to 50 cm H2O
CPAP Parameters Control Increments: 1 cm H2O
Rate Parameters Control Range: 0 to 150 BPM
Rate Parameters Control Increment: 1 BPM
Exhaled Tidal Volume (VT) Parameters Control Range: 0 to 4000 ml
Exhaled Tidal Volume (VT) Parameters Control Increment: 1 ml
Minute Ventilation (Min Vent) Parameters Control Range: 0 to 99 L/min
Minute Ventilation (Min Vent) Parameters Control Increment: 1 L/min
Total Leak (Tot Leak) Parameters Control Range: 0 to 300 L/min
Total Leak (Tot Leak) Parameters Control Increment: 1 L/min
Patient Leak (Pt. Leak) Parameters Control Range: 0 to 300 L/min
Patient Leak (Pt. Leak) Parameters Control Increment: 1 cm H2O
Peak Inspiratory Pressure (PIP) Parameters Control Range: 0 to 50 cm H2O
Peak Inspiratory Pressure (PIP) Parameters Control Increment: 1 cm H2O
Percent of Patient Triggered Breaths (Pt. Trig) Parameters Control Range: 0 to 100%
Percent of Patient Triggered Breaths (Pt. Trig) Parameters Control Increment: 1%
Pressure Control Board for Philips Respironics Bipap Vision Part Number: 1004710 For Bipap Visions with serial numbers starting at 106000 or higher 90 Day Warranty
DC Subsystem for Philips Respironics Bipap Vision
Serial numbers of 106xxx or higher required
For Bipap Vision with nurse call only
Part Number: 1004709
90 Day Warranty
Refurbished Resmed AirCurve 10 ST with Climateline Air Hose
Model: 37307
The AirCurve 10 ST is a bilevel device designed for patients who need need extra help with ventilation. The BIPAP/CPAP...
