The AII-2000A is an FDA-approved handheld oxygen analyzer from Analytical Industries, created to be accessible and easy to use for medical professionals. The AII-2000A operates with advanced galvanic oxygen sensors designed to last long and handheld. It features spot-checking oxygen levels for anesthesia, intensive care, and oxygen therapy.
Features:
Calibration: Air or certified 100% O2 before use or every 8 hours, after dis- connecting or replacing the batteries or oxygen sensor
Cleaning: Wipe components with a soft cloth dampened with water or mild
70% isopropyl alcohol solution in water. Compensation: Temperature
Connections: 1x16 mm thread or push-in flow diverter with o-ring seal Controls: Soft touch keypad for ON/OFF and menu function Dimensions: 3.6 x 5.9 x 1.6”; weight 10 oz. (280 grams)
< 80 lpm with 15mm tee adapter/tube AII-2000 A, M Humidity: Non-condensing 0-95% RH
Linearity: + 1% under constant conditions
Mounting: Flat surface for tripod extension or dovetail V-mount
Operating Range: 5º to 45ºC (41ºF to 113ºF)
Power: 2 AA Alkaline batteries; 1,200 hours of 24/7 use Pressure: Inlet - ambient or regulated; vent - atmospheric Power: 2 AA Alkaline batteries; 1,200 hours of 24/7 use
Response: 90% of final FS reading in 10 seconds
Sampling: ‘A version’ Ambient-remove flow diverter; flowing gas-install flow diverter, insert into tee-adaptor and position face down; ‘HC version” Connect 1/4” tubing to gas fitting on right side.
Sensitivity: < 0.5% of FS range
Sensor: ‘A version’ AII-11-60; ‘HC version’ AII-11-60-HC Sensor Life: 60 months in air at 25ºC and 1 atm
Storage: 0º to 45ºC (32ºF to 113ºF) on intermittent basis
Warm-up: None
Warranty: 24 months analyzer; 18 months sensor
Analysis: 0-100% oxygen
Accuracy: Less than + 1% of FS range under constant conditions and +5%
over the operating range
Application Considerations:
Anesthetic agents: Complies with ISO 80601-2-55 for the maximum error allowable over a given duration.
Temperature: Signal output and expected life change 2.54% per 1°C. Signal output is compensated within following ambi- ent calibration, step changes of 15°C require 30-60 minutes to equilibrate.
Pressure: Signal output and expected life change proportional- ly. Accurate at any pressure provided it is constant, change is gradual simulating the human lung and the device is calibrat- ed at the pressure of the sample gas.
Humidity: Non-condensing RH has no effect. Adding water vapor to the sample reduces the oxygen concentration.
Condensation: Causes erroneously readings if allowed to cover the sensing area or collect on electrical connections.
Electromagnetic Radiation: Susceptible to interference over frequencies from 26 MHz to 1000 MHz.
24 Months on the analyzer, 18 months for the sensor.
The MAXO2+AE is best used anywhere an inline analyzer is needed, when alarms are not deemed important. It is especially useful in conjunction with older ventilators or oscillators.
24 month...
The MAXO2+AE is best used anywhere an inline analyzer is needed, when alarms are not deemed important. It is especially useful in conjunction with older ventilators or oscillators.
24 month...
The AII-2000M is an FDA-approved handheld oxygen analyzer from Analytical Industries, created to be accessible and easy to use for medical professionals. The AII-2000M operates with advanced galvanic...
The AII-2000HC is a FDA-approved short-term oxygen monitor from Analytical Industries. The HC model was created for easy use by medical professionals alongside ventilators. It operates with advanced...
The AII-2000 Palm Analyzer is an FDA-approved handheld oxygen sensor from Analytical Industries, created to be accessible for both patients and medical professionals. The AII-2000 Palm Oxygen...
The Refurbished Masimo Radical-7 is a fully featured handheld Pulse CO-Oximeter™ that provides definitive measurements of arterial blood oxygen saturation and pulse rates. All provided by...
Resmed AirSense 10 Autoset CPAP - Refurbished
ALL UNITS COME WITH ZERO HOURS AND NEW MOTORS & MAIN BOARDS INSTALLED. Prescription Required.
Description:
ResMed's AirSense 10 Autoset CPAP...
Resmed AirSense 10 Autoset CPAP - Refurbished
https://bemesonline.com/resmed-airsense-10-autoset-cpap-refurbished/
Description:
Understandably, it is essential to take superior care of patients...
The PSR-11-75-KE7 is a galvanic respiratory sensor manufactured by Analytical Industries Inc. With a response time of 13 seconds, the 11-75-KE7 unit has a life of 60 months and is compatible with the...
Product Description:
The S9 Elite™ features user-friendly technology to enhance your breathing comfort and reduce system noise. Designed for a more natural breathing experience, the S9...